Specification Index

AS9100 AND ISO9001 CERTIFIED

BMS - Boeing Material Specifications

BMS7-332  BMS7-364  BMS7-26 BMS7-27  BMS7-28  

BMS7-182  BMS7-186  BMS7-122  BMS7-323

BAC 5602 BAC 5611 BAC 5613 BAC 5617 BAC 5619

DMS - McDonnell Douglas

MMS 217 DMS 1935 DMS 1800 DMS 1841

MIL - Military Specifications

MIL-HDBK-5 MIL-S-46850 FRACTURE TOUGHNESS MIL-S-8844 

MIL-S-8699 MIL-S-5000 MIL-S-6758 MIL-F-7190 MIL-T-9046 

MIL-T-9047 MIL-F-81556 MIL-F-82142

ALLOY STEEL

WROUGHT LOW ALLOY STEELS

AMS SPEC ALLOY       AEROSPACE AND DEFENSE COMPONENTS MATERIAL SPECIFICATIONS

AMS 6257 300M Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 1.6Si 0.82Cr 1.8Ni 0.40Mo 0.08V(0.40-0.44C) Consumable Electrode Vacuum Remelted Normalized and Tempered Alloy Steel

AMS 6260 9310 Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 1.2Cr 3.2Ni 0.12Mo (0.07-0.13C)

AMS 6265 9310 Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 1.2Cr 3.25Ni 0.12Mo (0.07-0.13C) Vacuum Consumable Electrode Remelted

AMS 6267 9310 Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 1.2Cr 3.25Ni 0.12Mo (0.07-0.13C) Electroslag Remelted or Consumable Electrode Vacuum Remelted Alloy Steel

AMS 6345 4130 Alloy Steel Sheets, Alloy Steel Strips, and Alloy Steel Plates, 0.95Cr 0.20Mo (0.28-0.33C) Normalized or Otherwise Heat Treated

AMS 6348 4130 Alloy Steel Bars, 0.95Cr 0.20Mo (0.28-0.33C) Normalized

AMS 6349 4140 Steel Bars, 0.95Cr 0.20Mo (0.28-0.43C) Normalized

AMS 6350 4130 Alloy Steel Sheets, Alloy Steel Strips, and Alloy Steel Plates, 0.95Cr 0.20Mo (0.28-0.33C)

AMS 6359 4340 Alloy Steel Sheet, Alloy Steel Strip, and Alloy Steel Plate, 0.80Cr 1.8NI 0.25Mo (0.38-0.43)

AMS 6370 4130 Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Rings, 0.95Cr 0.20Mo (0.28-0.33C)

AMS 6382 4140 Steel Bars, Alloy Steel Forgings, and Alloy Steel Rings, 0.95Cr 0.20Mo (0.38-0.43C)

AMS 6409 4340 Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 0.80Cr 1.8Ni 0.25Mo (0.38-0.43C) Special Aircraft Quality Cleanliness Alloy Steel, Normalized and Tempered Alloy Steel

AMS 6411 4330M (Mod) Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 0.88Cr 1.8Ni 0.42Mo 0.08V (0.28-0.33C) Consumable Electrode Remelted

AMS 6414 4340 Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 0.80Cr 1.8Ni 0.25Mo (0.38-0.43C) Vacuum Consumable Electrode Remelted

AMS 6415         4340     Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 0.80Cr 1.8Ni 0.25Mo 0.08V (0.38-0.43C)

AMS 6417 4340M/300M Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 1.6Si 0.82Cr 1.8Ni 0.40Mo 0.08V Consumable Electrode Vacuum Remelted Alloy Steel (0.39-0.43C)

AMS 6418 Hy-Tuf Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, and Alloy Steel Rings 1.3Mn 1.5Si 0.30Cr 1.8Ni 0.40Mo (0.23-0.28C)

AMS 6419 300M Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 1.6Si 0.82Cr 1.8Ni 0.40Mo 0.08V (0.40-0.45C) Consumable Electrode Vacuum Remelted (0.40-0.45C)

AMS 6425 Hy-Tuf Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 1.4Mn 1.5Si 0.30Cr 1.8Ni 0.40Mo(0.23-0.28C) Consumable Electrode Vacuum Remelted

AMS 6427 4330 Mod Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 0.88Cr 1.8Ni 0.42Mo 0.08V (0.28-0.33C)

AMS 6431 D6AC Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 1.05Cr 0.55Ni 1.0Mo 0.11V (0.45-0.50C) Vacuum Consumable Electrode Melted Alloy Steel

AMS 6439 D6AC Alloy Steel Sheet, Alloy Steel Strip, and Alloy Steel Plate 1.05Cr 0.55Ni 1.0Mo 0.12V (0.42-0.48C) Consumable Electrode Vacuum Melted, Annealed Alloy Steel

AMS 6440 52100 Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 1.45Cr (0.98 1.10C) For Alloy Steel Bearing Applications

AMS 6442 52100 Alloy Steel Bars, and Alloy Steel Forgings, 0.50CR (0.98-1.10C) For Bearing Applications

AMS 6444 52100 Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 1.45Cr (0.98 1.10C) Premium Aircraft Quality Alloy Steel, Consumable Electrode Vacuum Melted Alloy Steel

AMS 6448 6150 Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, Alloy Steel Torsion Bars, 0.95Cr 0.22V (0.48-0.53C) Vacuum Melted Annealed

AMS 6470 N135 Mod Bars, Forgings, and Tubing, Nitriding Steel, 1.6Cr 0.35mo 1.1Al (0.38-0.43C)

AMS 6471 N135 Mod Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, Nitriding Grade 1.6Cr 0.35Mo 1.1Al (0.38-0.43C) Normalized and Tempered

AMS 6472 N135 Mod Alloy Steel Bars, Alloy Steel Forgings, Nitriding 1.6Cr 0.35Mo 1.1Al (0.38-0.43C) Hardened and Tempered Alloy Steel, 112ksi (772 Mpa)

AMS 6484 4340 Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, 0.80Cr 1.8Ni 0.25Mo (0.38-0.43C) Normalized and Tempered

AMS 6487 H-11 Alloy Steel Bars, and Alloy Steel Forgings, 5.0Cr 1.3Mo 0.50V (0.38-0.43C) Consumable Electrode Vacuum Melted

AMS 6488 H-11 Alloy Steel Bars, Alloy Steel Forgings, 5.0Cr 1.3Mo 0.50V (0.38-0.43C)

AMS 6490 M-50 Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing 4.0Cr 4.25MO 1.0V (0.77-0.85) Premium Aircraft Quality for Bearing Applications, Consumable Electrode Vacuum Melted

AMS 6491 M-50 Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing 4.0Cr 4.25MO 1.0V (0.77-0.85) Premium Aircraft Quality for Bearing Applications, Double Vacuum Melted

AMS 6526 HP9-4-30 Alloy Steel Bars, Alloy Steel Forgings, and Alloy Steel Tubing, and Alloy Steel Rings, 1.0Cr 7.5Ni 4.5Co 1.0Mo 0.09V (0.29-0.34C) Consumable Electrode vacuum Melted, Annealed

ALUMINUM

ALUMINUM ALLOYS

AMS SPEC ALLOY     AEROSPACE AND DEFENSE COMPONENTS MATERIAL SPECIFICATIONS

AMS 4035 2024 Aluminum Alloy, Aluminum Alloy Sheet and Aluminum Alloy Plate 4.4Cu 1.5Mg 0.60Mn (2024-O) Annealed QQ-A-250/4

AMS 4037 2024 Aluminum Alloy, Aluminum Sheets and Aluminum Alloy Plate 4.4Cu 1.5Mg 0.60Mn (2024-T3)(2024-T351) Solution Heat Treated QQ-A-250/4

AMS 4045 7075 Aluminum Alloy, Aluminum Sheets and Aluminum Alloy Plate 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6) (7075-T651)Solution and Precipitation Heat Treated ASTM B209

AMS 4078 7075 Aluminum Alloy, Plate 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T7) (7075-T7351)Solution Heat Treated, Stress Relieved, and Overaged QQ-A-250/12, MMS 159

AMS 4050 7050 Aluminum Alloy, Aluminum Alloy Plate 6.2Zn 2.3Cu 2.2Mg 0.12Zr (7050-T7451) Solution Heat Treated Aluminum, Stress Relieved, and Overaged

AMS 4201 7050 Aluminum Alloy, Plate 6.2Zn 2.3Cu 2.2Mg 0.12Zr (7050-T7651) Solution Heat Treated Aluminum, Stress Relieved, and Overaged


STAINLESS STEEL

WROUGHT CORROSION AND HEAT RESISTANT STEELS AND ALLOYS

AMS SPEC ALLOY     AEROSPACE AND DEFENSE COMPONENTS MATERIAL SPECIFICATIONS

AMS 5510 321 Steel, Corrosion and Heat Resistant, Stainless Steel Sheet, Strip, and Plate 18Cr 10.5Ni 0. Solution Heat Treated

AMS 5513 304 Steel, Corrosion Resistant, Stainless Steel Sheet, Strip, and Plate 19Cr 9.2Ni Solution Heat Treated

AMS 5528 17-7PH Steel, Corrosion Resistant, Stainless Steel Sheet, Strip, and Plate 17Cr 7.1Ni 1.1Al. Solution Heat Treated, Precipitation Hardenable

AMS 5578 C455 Steel, Corrosion and Heat Resistant, Welded Tubing 12Cr 8.5Ni 0.30Cb 1.1Ti 2.0Cu Vacuum Induction Plus Vacuum Consumable Electrode Vacuum Melted

AMS 5599 625 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 62Ni 21.5Cr 9.0Mo

AMS 5604 17-4PH Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr 4.0Ni 4.0Cu 0.30Cb Solution Heat Treated, Precipitation Hardenable

AMS 5612 410 Steel, Corrosion and Heat Resistant, Stainless Steel Bars, Stainless Steel Wire, Forgings, Stainless Steel Tubing, and Rings 12Cr Ferrite Controlled, Annealed

AMS 5613 410 Steel, Corrosion and Heat Resistant, Stainless Steel Bars, Stainless Steel Wire, Stainless Steel Forgings, Tubing, and Rings 12.5Cr Annealed

AMS 5617 C455 Steel Bars and Forgings, Corrosion Resistant, 12Cr 8.5Ni 1.2Ti 2.0Cu, Vacuum Induction Plus Vacuum Consumable Electrode Melted, Solution Heat Treated

AMS 5629 13-8MO Steel, Corrosion Resistant, Stainless Steel Bars, Stainless Steel Forgings, Stainless Steel Rings and Extrusions, 13Cr 8.0Ni 2.2Mo 1 .1Al. Vacuum Induction Plus Consumable Electrode Melted Solution Heat

AMS 5630 440C Steel, Corrosion Resistant, Stainless Steel Bars, Stainless Steel Wire, and Forgings, 17Cr 8.0Ni 0.52Mo

AMS 5639 304 Steel, Corrosion Resistant, Stainless Steel Bars, Stainless Steel Wire, Stainless Steel Forgings, Tubing, and Rings 19Cr, 10Ni, Solution Heat Treated

AMS 5640       303   Steel, Corrosion Resistant, Stainless Steel Bars, Stainless Steel Wire, and Forgings, 18Cr, 9Ni

AMS 5643 17-4PH Steel, Corrosion Resistant, Stainless Steel Bars, Stainless Steel Wire, and Forgings Tubing, and Rings, 16Cr 4.0Ni 0.30(Cb+Ta) 4.0Cu Solution Heat Treated, Precipitation Hardenable

AMS 5644 17-7PH Steel, Corrosion Resistant, Stainless Steel Bars and Forgings, 17Cr 7Ni 1Al

AMS 5645 321 Steel, Corrosion Resistant, Stainless Steel Bars, Stainless Steel Wire, Stainless Steel Forgings, Tubing, and Rings 18Cr, 10Ni, 0.40Ti, Solution Heat Treated

AMS 5647 304L Steel, Corrosion Resistant, Stainless Steel Bars, Stainless Steel Wire, Stainless Steel Forgings, Stainless Steel Tubing and Rings, 19Cr 9.5Ni Solution Heat Treated

AMS 5648 316 Steel, Corrosion and Heat Resistant, Stainless Steel Bars, Stainless Steel Wire, Forgings, Stainless Steel Tubing, and Rings 17Cr 12Ni 2.5Mo, Solution Heat

AMS 5649 316FM Steel, Corrosion and Heat Resistant, Stainless Steel Bars, Stainless Steel Wire, and Forgings, 18Cr 13Ni 2.1Mo, Free Machining Solution Heat Treated

AMS 5656 21-6-9 (NIT 40) Steel, Corrosion Resistant, Stainless Steel Bars, Stainless Steel Wire, Stainless Steel Forgings, Extrusions, and Rings 9.0Mn 20Cr 6.5Ni 0.27N Solution Heat Treated

AMS 5659 15-5PH Steel, Corrosion Resistant, Stainless Steel Bars, Stainless Steel Wire, Stainless Steel Forgings, Stainless Steel Rings and Extrusions, 15Cr 4.5Ni 0.30Cb 3.5Cu, Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable

AMS 5743 AM-355 Steel, Corrosion and Heat Resistant, Stainless Steel Bars and Forgings 56.5Cr 4.5Ni 2.9Mo 0.10N, Equalized and Over-Tempered

AMS 5745 AM-350 Steel, Corrosion and Heat Resistant, Stainless Steel Bars and Forgings 16.5Cr 4.5Ni 2.9mo 0.10N, Equalized and Over-Tempered

AMS 5763 C450 Steel Bars, Forgings, Tubing, and Rings, Corrosion Resistant, 15Cr 6.5Ni 0.75Mo 0.50(Cb + Ta) 1.5Cu, Solution Heat Treated

AMS 5764 NIT 50 XM-19 Steel, Corrosion Resistant Stainless Steel Bars, Stainless Steel Wire, Stainless Steel Forgings, Stainless Steel Extrusions, and Rings 5.0Mn 22Cr 12.5Ni 2.2Mo 0.20Cb 0.30N 0.20V Solution Heat Treated

AMS 5773 C450 Steel Bars, Wire, Forgings, Stainless Steel Tubing, and Rings, Corrosion Resistant, 15Cr 6.5Ni 0.75Mo 0.50(Cb + Ta) 1.5Cu, Solution Heat Treated

AMS 5780 AM-355 Steel, Corrosion and Moderate Heat Resistant, Welding Wire 15.5Cr 4.5Ni 2.9Mo 0.10N

AMS 5848 NIT 60 XM-18 Steel, Corrosion Resistant Stainless Steel Bars, Stainless Steel Wire, Stainless Steel Forgings, Extrusions, Tubing, and Rings Wear and Galling Resistant 8.0Mn 4.0 Si 17Cr 8.5Ni 0.13N Solution Heat Treated

AMS 5860 C455 Steel, Corrosion and Moderate Heat Resistant, Sheet, Strip, and Plate 12Cr 8.5 Ni 0.30(Cb + Ta) 1.1 Ti 2.0 Cu, Multiple Melted, Solution Heat Treated, Precipitation Hardenable

AMS 5862 15-5PH Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr 4.5Ni 0.30Cb 3.5Cu, Consumable Electrode Remelted, Solution Heat Treated, Precipitation Hardenable

NICKEL

NICKEL BASED

AMS SPEC ALLOY     AEROSPACE AND DEFENSE COMPONENTS MATERIAL SPECIFICATIONS

AMS 5525 A286 Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 15Cr 25.5Ni 1.2Mo 2.1Ti 0.006B 0.30V, 1800ºF (982ºC) Solution Heat Treated

AMS 5596 718 Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, Foil, and Plate 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted, 1775ºF (968ºC) Solution Heat Treated

AMS 5662 718 Nickel Alloy, Corrosion and Heat Resistant, Nickel Alloy Bars, Nickel Alloy Forgings, and Rings 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted, 1775ºF (968ºC) Solution Heat Treated, Precipitation Hardenable

AMS 5663 718 Nickel Alloy, Corrosion and Heat Resistant, Nickel Alloy Bars, Nickel Alloy Forgings, and Rings 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 19Fe Consumable Electrode or Vacuum Induction Melted 1775ºF (968ºC) Solution and Precipitation Heat Treated

AMS 5664 718 Nickel Alloy, Corrosion and Heat Resistant, Nickel Alloy Bars, Nickel Alloy Forgings, and Rings 52.5Ni 19Cr 5.1Cb 0.90Ti 0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted, 1950ºF(1066ºC) Solution Heat Treated, Precipitation Hardenable

AMS 5666 625 Nickel Alloy, Corrosion and Heat Resistant, Nickel Alloy Bars, Nickel Alloy Forgings, Extrusions, and Rings 62Ni 21.5Cr 9.0Mo

AMS 5667 X-750 Nickel Alloy, Corrosion and Heat Resistant, Nickel Alloy Bars, Nickel Alloy Forgings, and Nickel Alloy Rings 72Ni 15.5Cr 0.95(Cb + Ta) 2.5Ti 0.70Al 7.0Fe, Equalized, Precipitation Hardenable

AMS 5668 X-750 Nickel Alloy, Corrosion and Heat Resistant, Nickel Alloy Bars, Nickel Alloy Forgings, and Nickel Alloy Rings 72Ni 15.5Cr 7.0Fe 2.5Ti 1.0(Cb + Ta) 0.95(Cb + Ta) 0.70Al, 2100ºF(1149ºC) Solution and Precipitation Heat Treated

AMS 5672 C455 Steel Wire, Corrosion Resistant Steel, 11.8Cr 8.5Ni 0.30(Cb + Ta) 1.1Ti 2.0Cu, Precipitation Hardenable, Spring Temper Steel

AMS 5706 Waspaloy Nickel Alloy, Corrosion and Heat Resistant, Nickel Alloy Bars, Nickel Alloy Forgings, and Nickel Alloy Rings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr, Consumable Electrode or Vacuum Induction Melted, ,1825 to 1900ºF Solution Heat Treated

AMS 5707 Waspaloy Nickel Alloy, Corrosion and Heat Resistant, Nickel Alloy Bars, Nickel Alloy Forgings, and Nickel Alloy Rings 58Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr, Consumable Electrode or Vacuum Induction Melted, 1825 to 1900ºF (996 to 1038º C) Solution, Stabilization, and Precipitation Heat Treated

AMS 5708 Waspaloy Nickel Alloy, Corrosion and Heat Resistant, Nickel Alloy Bars, Nickel Alloy Forgings, and Nickel Alloy Rings 58Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr, Consumable Electrode or Vacuum Induction Melted, 1975ºF (1079ºC) Solution Heat Treated

AMS 5709 Waspaloy Nickel Alloy, Corrosion and Heat Resistant, Nickel Alloy Bars and Nickel Alloy Forgings 58Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr, Consumable Electrode or Vacuum Induction Melted, ,1975ºF (1079ºC) Solution, Stabilization, and Precipitation Heat Treated

AMS 5731 A286 Steel, Corrosion and Heat Resistant Steel, Steel Bars, Steel Wire, Steel Forgings, Steel Tubing, and Steel Rings 15Cr 25.5Ni 1.2Mo 2.1Ti 0.006B 0.30V, Consumable Electrode Melted, 1800ºF (982ºC) Solution and Precipitation Heat Treated

AMS 5732 A286 Steel, Corrosion and Heat Resistant, Steel Bars, Steel Wire, Steel Forgings, Steel Tubing, and Steel Rings 15Cr 25.5Ni 1.2Mo 2.1Ti 0.006B 0.30V, Consumable Electrode Melted, 1800ºF (980ºC) Solution and Precipitation Heat Treated

AMS 5734 A286 Steel, Corrosion and Heat Resistant Steel, Steel Bars, Steel Wire, Steel Forgings, and Steel Tubing, 15Cr 25.5Ni 1.2Mo 2.1Ti 0.006B 0.30V, Consumable Electrode Melted Steel, 1650ºF(899ºC), Solution Heat Treated

AMS 5737 A286 Steel, Corrosion and Heat Resistant Steel, Steel Bars, Steel Wire, Steel Forgings, and Steel Tubing, 15Cr 25.5Ni 1.2Mo 2.1Ti 0.006B 0.30V, Consumable Electric Electrode Melted, 1650ºF(899ºC), Solution and Precipitation Heat Treated Steel

AMS 5754 Hastelloy X Nickel Alloy, Corrosion and Heat Resistant, Nickel Alloy Bars, Nickel Alloy Forgings, and Nickel Alloy Rings 47.5Ni 22Cr 1.5Co 9Mo 0.60W 18.5Fe, Solution Heat Treated

AMS 5759 L605 Cobalt Alloy, Corrosion and Heat Resistant, Cobalt Alloy Bars, Cobalt Alloy Forgings, and Cobalt Alloy Rings, 52Co 20Cr 10Ni 15W Solution Heat Treated Cobalt Alloy

AMS 6512 Maraging 250 Steel Bars, Forgings, Tubing, and Rings, 18Ni 7.8Co 4.9Mo 0.40Ti 0.10Al Consumable Electrode Vacuum Melted, Annealed

AMS 6514 Maraging 300 Steel, Maraging, Bars, Forgings, Tubing and Rings 18.5Ni 9.0Co 4.9Mo 0.65Ti 0.10Al Consumable Electrode Vacuum Melted, Annealed

AMS 6478 Aermet 100 Steel, Steel Bars and Steel Forgings, 3.1Cr 11.5Ni 13.50Co 1.2Mo (0.21-0.25C) Vacuum Melted Steel, Annealed Heat Treatable to 290 ksi

AMS 6532 Aermet 100 Steel, Steel Bars and Steel Forgings, 3.1Cr 11.5Ni 13.50Co 1.2Mo (0.21-0.25C) Vacuum Melted, Annealed


BOEING

BMS SPEC         ALLOY BOEING AEROSPACE AND DEFENSE COMPONENTS MATERIAL SPECIFICATIONS

BMS7-332 13-8MO PH13-8Mo CRES BAR, FORGING STOCK, FORGINGS AND EXTRUSIONS WITH CONTROLLED FRACTURE TOUGHNESS

BMS7-364 CUSTOM 465 12CR-11NI-1.7TI-1MO CORROSION RESISTANT STEELE BAR, WIRE, FORGINGS, AND FORGING STOCK (UNS S46500)

BMS7-26 4340M (300M) STEEL BAR, FORGING STOCK, AND TUBING -4340 MODIFIED

BMS7-27 4330M 4330M Steel Bar, Forging Stock & Tubing

BMS7-28 4340 STEEL BARS, RODS AND FORGING STOCK (4340)

BMS7-182 HP9-4-30 STEEL BAR, FORGING STOCK, AND MECHANICAL TUBING: 9NI-4CO

BMS7-186 Forgings ALUMINUM ALLOY FORGINGS (7075-T7352)

BMS7-122 4330M Consumable Electrode Vacuum Arc Remelted 4330 Modified (AMS 6411) Steel

BMS7-323 7050 HIGH STRENGTH FATIGUE TOLERANT, STRESS CORROSION RESISTANT 7050 ALUMINUM ALLOY PLATE


MCDONNELL DOUGLAS

DMS SPEC ALLOY MCDONNELL DOUGLAS AEROSPACE AND DEFENSE COMPONENTS MATERIAL SPECIFICATIONS

DMS 1555 4340   4340 Special Quality Steel

DMS 1662 AQ Quality   Steel, Chromium (Premium Aircraft Quality)

DMS 1800 Forgings   FORGINGS, STEEL

DMS 1834 Forgings   FORGINGS, ALUMINUM

DMS 1841 Hy-Tuf   Steel, Hy-Tuf

DMS 1869 Cleanliness   Special Aircraft Quality Steel Cleanliness

DMS 1881 Forgings   Forging, Titanium

DMS 1891 4330V   4330V Modified Steel

DMS 1935 300M   STEEL , 300M (VACUUM MELTED)

DMS 2050 304L   Stainless Steel, 304L, Bar & Forgings

DMS 2098 7075-T7352   Aluminum Alloy Forgings, Premium Grade (7075/7175)

DMS 2100 13-8MO   STEEL, CORROSION RESISTANT, PH13-8MO

DMS 2201 QPL   PROCUREMENT FROM FOREIGN SOURCES METALLIC RAW MATERIALS

DMS 2233 7050-T7451   PLATE, ALUMINUM ALLOY, 7050

DMS 2257 2024-T351   ALUMINUM ALLOY PLATE, 2024, FRACTURE TOUGHNESS TESTED

DMS 2284 4130   Special Quality Aircraft Steel, Chrome-Molybdenum (4130) Bars #Posten and Reforging Stock


CONTROLS AND PROCESSES

AMS SPEC ALLOY         AEROSPACE AND DEFENSE COMPONENTS MATERIAL SPECIFICATIONS

AMS 2300 Cleanliness Premium Aircraft-Quality Steel Cleanliness, Magnetic Particle Inspection

AMS 2301 Cleanliness Cleanliness, Aircraft Quality Steel Magnetic Particle Inspection Procedure

AMS 2759 Thermal Process Heat Treatment of Steel Parts General Requirements

AMS 2774 Thermal Process Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts


FORGING

AMS SPEC       ALLOY AEROSPACE AND DEFENSE COMPONENTS MATERIAL SPECIFICATIONS

ASTM A705 Forging – Open Die

MIL-F-83311

MIL-F-7190 Military Spec Forging, Steel, for Aircraft/Aerospace Equipment and Special Ordnance Applications

DMS 1800 CLASS 1 GRADE A McDonnell Douglas Forging, Requirements for Steel, Technique Qualification Approval, Forging Plan

Call or E-mail with your project needs and we will respond to your quote right away

Contact us today for all your metal needs!

Sales@BoydAerospaceSupply.com